I trying to find a way to turn off the ele. fan at speeds above 40mph
and turn on when below 40mph.
Don
On Friday, June 18, 2004, at 07:18 PM, Bernd D. Ratsch wrote:
>
> What are you trying to do Don?
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Michael
> Maskalans
> Sent: Friday, June 18, 2004 5:20 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: RE: Deep electronic question..
>
>
>
>
> On Jun 18, 2004, at 17:14, Tony Cellana wrote:
>
>> You might also be able to hang a counter circuit off the RWSS. Once
>> you hit
>> "X" number of pulses per second, you could enable/disable the planned
>> electronics.
>
> Unless you could somehow tap into the cruise enable/disable, which is
> probably completely internal to the PCM and thus for all intents and
> purposes untapable, this is probably going to be the only real option.
>
> Of course you could probably put some sort of a sensor on the
> speedometer itself - maybe a microswitch glued to the speedo at 40mph
> that the needle would hit and trip - of course it'd be damn tough to
> make the speedo work above that speed, then, and pegging it's travel
> would probably not do the motor that moves it any good =)
> --
> Michael Maskalans <http://mike.tepidcola.com/>
> mobile.612.618.4652 home.585.935.7129 fax.360.364.3930
>
>
>
This archive was generated by hypermail 2b29 : Thu Jul 01 2004 - 00:15:17 EDT