Look at it from this point: If you over-build your circuit, you share the
risk of overloading your wiring harness - burning them up. Best bet is to
put them at the max rating as relays and fuses are designed to save your
wiring harness.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of srp@cox.net
Sent: Monday, June 28, 2004 8:33 AM
To: dakota-truck@dakota-truck.net
Subject: Re: Re: DML: Viper Fan - Technical Info?
Just as the fan puts a load on the relay... (Not a electrician, but from
what I've gone through-- that seems to be what goes first-- cheap relays,
lots of load, and high duty cycle, especially if tied into your AC/TEMP
connector -- fan will cycle on a off frequently in traffic)
Sam
This archive was generated by hypermail 2b29 : Thu Jul 01 2004 - 00:15:18 EDT