FWIW, I use 2 degree shims in mine. Lowered 2" front, 3" rear.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of KenCo
> Sent: Friday, July 02, 2004 7:12 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: Pinion Angle
>
>
> James Calder wrote:
> > What degree wedge plates should be used on a 3" lowered rear via leaf
> > springs to correct the pinion angle? Summit has 2, 2.5, 4, and 6
> > degree plates. This is on a GenII.
> > Thanks,
> > James
>
This archive was generated by hypermail 2b29 : Sun Aug 01 2004 - 00:46:14 EDT