> > Should those work ok with the stock ignition?
> Yup...got a set in my wife's Jeep as well (stock ignition system).
Cool.
> Kit for a wire reroute?!? You run the wires differently...nothing
> else(conduit is already on them from the factory).
As for conduit, i don't think it ever had it. When i changed the
wires at 30k, i don't remember any. If it did, i'm sure i put it
back (i'm very careful about things like that), which would mean the
dealer left it off during this recent trip.
The tsb has yoy run the wires on the throttle body side of the valve
cover, so there are 3 one wire clips.
Here's the tsb that describes it:
http://dodgeram.info/tsb/1998/18-48-98.htm
It would be kind of sloppy (in my 99 at least) to do it w/o the
clips. It would work of course. But, since i paid for the parts, i
want them.
This dealer has been good about big repairs (like rebuilding the
rear end, replacing the steering column, etc) but seems to not do
well with the easy jobs. I guess that's better than the other way
around. :)
eric
-- 1974 Valiant 4-door, 318 1999 Dakota Ext Cab, 2WD
This archive was generated by hypermail 2b29 : Sun Aug 01 2004 - 00:46:14 EDT