Yes...and they work very well.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Doug Myers
Sent: Sunday, August 01, 2004 12:18 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: injectors (again)
OK, I found some info. According to a speech Larry Shepard gave on 6/15/01
at an R/T Club Meet, the stock injectors for a 360 flow 23# @ 3.8 BAR.
Aftermarket injectors are rated at 3.0 BAR. The correction factor is .853.
So....
The stock injectors would be rated at 19# @ 3.0 BAR.
My FMS injectors, 24# @ 3.0 BAR, would be rated at 28# @ 3.8 BAR. No wonder
I'm so rich.
I did find an Accel part number, 150821, that is rated at 21# @ 3.0 BAR.
After applying the conversion, it ends up at 24.61# @ 3.8 BAR. This is only
slightly richer than the stock injector. Has anyone tried these?
Doug Myers
'99 Dakota 5.9L/5-speed/3.92SG
This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:40 EDT