Re: ball joint recall?

From: Josh Battles (josh@omg-stfu.com)
Date: Fri Sep 10 2004 - 17:12:58 EDT


""Chocolate Salty Balls - CSB -"" <csb_jk@hotmail.com> wrote in message
>
> How do I check that (front shock bolt).
>
> Also, where can I get a 2000 dakota service manual?

To check the shock bolts on a 2wd, you need to turn the wheels to one lock
and then get down underneath the front. The shocks will be inside the
springs and there is a bolt at the top (inside the engine compartment) and
two on the bottom of the lower control arm. If any of these are loose (like
mine are) you'll get a noise from the shock as it bounces around.

You can get a FSM from here: http://www.techauthority.daimlerchrysler.com/
or you can call your local parts dept and they'll give you the phone number
for chrysler publications. It usually comes in about a week and costs about
$75 - $80.

-- 
- Josh
Lowered 2000 Dakota CC 3.9L
All facts have been omitted from this post.
www.omg-stfu.com



This archive was generated by hypermail 2b29 : Fri Oct 01 2004 - 11:38:58 EDT