No problems (you know about the linkage already)....may be a bit big for a
stock 318 though without some decent mods. (Looks like you're gonna have
that covered though)
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
kvmac45@comcast.net
Sent: Wednesday, September 29, 2004 10:19 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Holley Billet TB on 1992?
Will the Holley TB fit on a 1992 Dakota? Considering getting a 52mm one off
an R/T. I know the throttle linkage is different so new throttle cables
would be needed. Would I have any other clearance issues with the fuel rail
or anything?
Would it be worth it to even consider going to a 52mm one? Currently I have
the stocker that has been ported and polished by hand. Not perfect but did
make a big difference. The engine has high miles on it but will eventually
be replaced with a new shortblock 318 with R/T heads and possibly a S/C, or
a low mileage 360 and build it up. Thanks.
This archive was generated by hypermail 2b29 : Fri Oct 01 2004 - 11:38:59 EDT