Already rulled out the head gasket?
Later!
Tom "Slick" North
------------------------------------------------------------------------
The information transmitted in this electronic mail messages, sent from
tbn0007@unt.edu, prodog@swbell.net, or tnorth@hotmail.com is:
1) intended only for the person, persons, entity, or entities to which it is
addressed to
2) contains confidential and/or privileged materials.
In the case of confidential and/or privileged materials, any review,
retransmission, dissemination or other use of or taking of any action in
reliance upon these materials, by persons or entities other than the
intended recipient may be the subject of legal action.
If you receive an email in error from tbn0007@unt.edu, prodog@swbell.net, or
tnorth@hotmail.com, please:
1) contact the sender;
2) delete the material from your computer.
------------------------------------------------------------------------
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> Bernd D. Ratsch
> Sent: Monday, October 04, 2004 9:28 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Houston Mopar Show - Oops
>
>
>
> Well...looks like it's time to tear down the left bank on the
> old V6. All cylinders (except for #1) were within 2-3% of
> each other...#1 had only 50psi pressure (oops). From the
> signs, looks like it's going to be either a broken valve
> spring/valve and/or cracked head.
>
> However...hehehe...even with the miss on #1, still clocked
> off a 14.93 on one run.
>
> - Bernd
>
This archive was generated by hypermail 2b29 : Mon Nov 01 2004 - 10:47:42 EST