Oh yeah. Definitely not a head gasket. :(
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Tom "Slick"
North
Sent: Monday, October 04, 2004 11:12 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Houston Mopar Show - Oops
Already rulled out the head gasket?
Later!
Tom "Slick" North
------------------------------------------------------------------------
The information transmitted in this electronic mail messages, sent from
tbn0007@unt.edu, prodog@swbell.net, or tnorth@hotmail.com is:
1) intended only for the person, persons, entity, or entities to which it is
addressed to
2) contains confidential and/or privileged materials.
In the case of confidential and/or privileged materials, any review,
retransmission, dissemination or other use of or taking of any action in
reliance upon these materials, by persons or entities other than the
intended recipient may be the subject of legal action.
If you receive an email in error from tbn0007@unt.edu, prodog@swbell.net, or
tnorth@hotmail.com, please:
1) contact the sender;
2) delete the material from your computer.
------------------------------------------------------------------------
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
> Ratsch
> Sent: Monday, October 04, 2004 9:28 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Houston Mopar Show - Oops
>
>
>
> Well...looks like it's time to tear down the left bank on the old V6.
> All cylinders (except for #1) were within 2-3% of each other...#1 had
> only 50psi pressure (oops). From the signs, looks like it's going to
> be either a broken valve spring/valve and/or cracked head.
>
> However...hehehe...even with the miss on #1, still clocked off a 14.93
> on one run.
>
> - Bernd
>
This archive was generated by hypermail 2b29 : Mon Nov 01 2004 - 10:47:42 EST