You can use an a518, which is used with the 318 Daks. You will need the 518
dust cover, dipstick tube and indicator, and a couple of the shifter linkage
brackets are different, but I don't recall which. I believe it is the one
that mounts to the trans and connects the crossbar to the truck frame and
also (for sure) the one that mounts on the gear selector (should be straight
not angled down). You have to use the v6 flexplate and torque converter.
Also, the driveshafts are the same.
David
This archive was generated by hypermail 2b29 : Mon Nov 01 2004 - 10:47:43 EST