The 93 outflow the others and will use a different Y pipe due to the larger
outlet diameter. Otherwise they will interchange
Greg Conner
>From: "James Calder" <jCalder3@cfl.rr.com>
>Reply-To: dakota-truck@dakota-truck.net
>To: <dakota-truck@dakota-truck.net>
>Subject: RE: DML: RE: Engine Part Interchangeability
>Date: Sun, 24 Oct 2004 14:56:09 -0400
>
>
>Thanks guys for the replies.
>Are exhaust manifolds (not headers) for a '93 Dakota, '94 Ram and '97 Ram
>the same (with the exception of an EGR port)?
>
>-----Original Message-----
>From: owner-dakota-truck@bent.twistedbits.net
>[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of greg conner
>Sent: Sunday, October 24, 2004 11:14 AM
>To: dakota-truck@dakota-truck.net
>Subject: RE: DML: RE: Engine Part Interchangeability
>
>
>You can call up summit and order the proper plugs and pins if you don't
>already have them. The injectors are all supplied 12v from a common splice
>in the harness. Trace one of the positive inj wires back into the harness
>to
>find it. It is a green wire with an orange tracer. The injector fires when
>it is grounded via the pcm. On your 93 dak injector #7 is grounded via pin
>17 and #8 is grounded via pin 18 on the pcm. Run the negative side of the
>new inj plug to the proper pin on the pcm and the positive side to the
>common splice. Saves ya about 500 bucks at the dealer for a new harness
>
>
>
>Greg Conner
>
>
>
> >From: "James Calder" <jCalder3@cfl.rr.com>
> >Reply-To: dakota-truck@dakota-truck.net
> >To: <dakota-truck@dakota-truck.net>
> >Subject: DML: RE: Engine Part Interchangeability
> >Date: Sun, 24 Oct 2004 07:39:01 -0400
> >
> >
> >Thanks for the info.
> >A v6 wire harness can be used on a v8? 2 wires need to be added for the
> >extra injectors and wired to the correct pins on the v8 PCM which can
> >be found in the FSM, correct?
> >Thanks again,
> >James
> >
> > -----Original Message-----
> >From: owner-dakota-truck@bent.twistedbits.net
> >[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Mike
> >Sykes
> >Sent: Saturday, October 23, 2004 11:45 PM
> >To: dakota-truck@dakota-truck.net
> >Subject: DML: Re: Engine Part Interchangeability
> >
> >
> > >>Are injectors on a '93 3.9 Dakota the same as a '93 5.2 Dakota?
> >yes
> >
> > >>Are '94 Ram injectors the same as '93 Dakota injectors?
> >yessir
> >
> > >>Is the '94 318 Ram oil pan the same as a '93 318 Dakota's?
> >no. Different pan and oil pickup.
> >
> >-miggity
> >Newport News VA
> >2000 FR R/T CC
> >
> >"...someone set up us the bomb...."
> >
> >-----Original Message-----
> >From: owner-dakota-truck@bent.twistedbits.net
> >[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of James
> >Calder
> >Sent: Saturday, October 23, 2004 11:05 PM
> >To: dakota-truck@dakota-truck.net
> >Subject: DML: Engine Part Interchangeability
> >
> >
> >I hope someone can help me figure out part interchangeability for the
> >following:
> >
> >Are injectors on a '93 3.9 Dakota the same as a '93 5.2 Dakota?
> >Are '94 Ram injectors the same as '93 Dakota injectors?
> >Is the '94 318 Ram oil pan the same as a '93 318 Dakota's?
> >
> >Thanks in advance!
> >James
> >
> >
> >
> >
>
>_________________________________________________________________
>Is your PC infected? Get a FREE online computer virus scan from McAfeeR
>Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>
>
_________________________________________________________________
Check out Election 2004 for up-to-date election news, plus voter tools and
more! http://special.msn.com/msn/election2004.armx
This archive was generated by hypermail 2b29 : Mon Nov 01 2004 - 10:47:43 EST