the squeaking on my suspension goes out before i get to the cruise... but
then again, i am not actually participating in the cruise, so i don't think
anybody'd actually care.
Gabriel A. Couriel
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
david.clement@verizon.net
Sent: Wednesday, October 27, 2004 9:12 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Re: Poly bushing
Yea, but it's embarrassing when you are pulling into a parking spot at the
local cruise and the engine is idling and everyone looks to see what the
creaking is! ;\
Dave Clement
99 SLT+ CC 4x4
In article <clnduo$ann$1@bent.twistedbits.net>, josh@omg-stfu.com (Josh
Battles) writes:
>
>
> david.clement@verizon.net wrote:
>
> > I rebuilt the front suspension on my Barracuda last winter with
polygraphite
> > bushings. Within two months they were sqeaking and creaking. There was
not
> > enough of an improvement in handling to warrent putting up with the
creaking so
> > I will be rebuilding the front end with stock rubber busings this
winter.
> >
> > Dave Clement
> > 99 SLT+ CC 4x4
>
> Meh, quietness is overrated anyway. If you can hear the bushings
> creaking your exhaust isn't loud enough. =P
>
> --
> - Josh
> Lowered 2000 Dakota CC 3.9L
> Above Statement Not True ^^^^^
> www.omg-stfu.com
This archive was generated by hypermail 2b29 : Mon Nov 01 2004 - 10:47:43 EST