No...not that. The OD and Shift Solenoid Pack (harness goes to the top of
the trans - have to remove the VB for that).
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bob Tom
Sent: Monday, November 15, 2004 8:21 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Shift Solinoid??
At 07:02 AM 11/15/04, you wrote:
>Install time is about 1 hour as you have to raise the vehicle, drop the
>trans pan, drop the valve body, replace the solenoid pack, and
>reinstall/refill. - Bernd
I could be wrong since it's been awhile but I don't recall dropping the
valve body when I replaced both the governor pressure solenoid and sensor on
my 44RE.
Bob
This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:47:52 EST