RE: RE: Need a paint for AC tubes

From: Bernd D. Ratsch (fasstdak@hotmail.com)
Date: Thu Nov 25 2004 - 09:20:41 EST


I see the older lines a lot - peeling, chipping, cracked...it's an older
epoxy based paint that was used from the manufacturer. Once anything gets
under the clean surface of the paint, it's history. Best to leave the lines
aluminum.

- Bernd

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of RayB
Sent: Wednesday, November 24, 2004 8:10 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Need a paint for AC tubes

I wouldn't paint aluminum lines either but I believe those were first
introduced with the R134 stuff. My '92, R12 equipped AC came with black
painted steel lines and the original paint tended to chip or peel, causing
the lines to rust. I've seen the aluminum lines highly polished and they
look really good.

RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html

> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Bernd D.
> Ratsch
> Sent: Wednesday, November 24, 2004 7:59 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: RE: Need a paint for AC tubes
>
>
>
> Well....there ya have it (the answer). ;)
>
> I never bothered to paint A/C lines (the look good in brushed aluminum).
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of RayB
> Sent: Wednesday, November 24, 2004 12:17 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RE: RE: Need a paint for AC tubes
>
>
>
> > -----Original Message-----
> > The A/C lines will get very hot and very cold so you'll need a
> > quality paint that can handle this (not to mention cleaning the
> > lines really good - no dirt - to hold the paint).
> >
> > Some folks have tried the high-temp ceramic paint (works well on
> > dry/hot
> > items) but don't know how it'll hold up to the condensation and
> cold temp.
> >
> > - Bernd
> >
>
> Gee, if only I'd known. hehehe...I touched up mine with a brush and
> rustoleum paint about 8 years ago and they still look like new. :-)
>
> RayB
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>



This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:47:53 EST