The top of the passenger seat is about 3 inches from the window and in a
normal seating attitude, not straight up. With it behind the passenger
seat, I wasn't as worried about minor clearance issues.
I can't seem to find the pics of the install process, but I'll snap a
few of the finished product.
Tim
#-----Original Message-----
#From: owner-dakota-truck@bent.twistedbits.net [mailto:owner-dakota-
#truck@bent.twistedbits.net] On Behalf Of Tom "Slick" North
#Sent: Wednesday, December 15, 2004 4:14 PM
#To: dakota-truck@dakota-truck.net
#Subject: DML: RE: RE: Gen 1/2 question - Speaker enclosures
#
#
#With the basslink, were you able to set the seat back all the way, were
you
#able to lean the seat back at all?
#
#Thanks for the info!
#
#Tom "Slick" North
#
#
#
#
#> -----Original Message-----
#> From: owner-dakota-truck@bent.twistedbits.net
#> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
#> Pindell, Timothy
#> Sent: Wednesday, December 15, 2004 8:33 AM
#> To: dml@dakota-truck.net
#> Subject: DML: RE: Gen 1/2 question - Speaker enclosures
#>
#>
#>
#> I put a powered Infinity Basslink behind the passenger seat
#> in my '94 RC. It measures 14x12x8. I have pictures of the
#> install somewhere. I'll see if I can find them this evening.
#> With 200W in the small cab space, it simply rocks. It will
#> not rumble the 'hood, however, so the homies will not be
#> impressed. I was looking for quality of sound rather than
#> quantity, and for the money, I'm very happy with it.
#>
#> http://www.infinitysystems.com/caraudio/product.aspx?ProdId='B
#ASSLINK'&S
#er=BSL&Cat=PSU
#
#Crutchfield has them, but I got mine >considerably< cheaper NIB from
Ebay.
#
##-----Original Message-----
##From: owner-dakota-truck@bent.twistedbits.net [mailto:owner-dakota-
##truck@bent.twistedbits.net] On Behalf Of Tom "Slick" North
##Sent: Tuesday, December 14, 2004 4:04 PM
##To: dakota-truck@dakota-truck.net
##Subject: DML: Gen 1/2 question - Speaker enclosures
##
##
##Just wanted to find out what size speaker enclosure you guys have
placed
##behind the seats of regular cab dakotas (Gen 1 or Gen 2)... # #I'm
looking
#at using the following dimensions:
##14" h X 7" bd X 4" td X 20" w (.51 cu.ft.)
##
##What dimensions have you all been sucessful with?
##
##My only concerns are being able to set the seat all the way back, and
not
##leaned back a little (can't stand sitting straight up like a board)...
#
##Tom "Slick" North #96 5.2L Sport RC Dakota
This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:48:08 EST