With the basslink, were you able to set the seat back all the way, were you
able to lean the seat back at all?
Thanks for the info!
Tom "Slick" North
------------------------------------------------------------------------
The information transmitted in this electronic mail messages, sent from
tbn0007@unt.edu, prodog@swbell.net, or tnorth@hotmail.com is:
1) intended only for the person, persons, entity, or entities to which it is
addressed to
2) contains confidential and/or privileged materials.
In the case of confidential and/or privileged materials, any review,
retransmission, dissemination or other use of or taking of any action in
reliance upon these materials, by persons or entities other than the
intended recipient may be the subject of legal action.
If you receive an email in error from tbn0007@unt.edu, prodog@swbell.net, or
tnorth@hotmail.com, please:
1) contact the sender;
2) delete the material from your computer.
------------------------------------------------------------------------
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> Pindell, Timothy
> Sent: Wednesday, December 15, 2004 8:33 AM
> To: dml@dakota-truck.net
> Subject: DML: RE: Gen 1/2 question - Speaker enclosures
>
>
>
> I put a powered Infinity Basslink behind the passenger seat
> in my '94 RC. It measures 14x12x8. I have pictures of the
> install somewhere. I'll see if I can find them this evening.
> With 200W in the small cab space, it simply rocks. It will
> not rumble the 'hood, however, so the homies will not be
> impressed. I was looking for quality of sound rather than
> quantity, and for the money, I'm very happy with it.
>
> http://www.infinitysystems.com/caraudio/product.aspx?ProdId='B
ASSLINK'&S
er=BSL&Cat=PSU
Crutchfield has them, but I got mine >considerably< cheaper NIB from Ebay.
#-----Original Message-----
#From: owner-dakota-truck@bent.twistedbits.net [mailto:owner-dakota-
#truck@bent.twistedbits.net] On Behalf Of Tom "Slick" North
#Sent: Tuesday, December 14, 2004 4:04 PM
#To: dakota-truck@dakota-truck.net
#Subject: DML: Gen 1/2 question - Speaker enclosures
#
#
#Just wanted to find out what size speaker enclosure you guys have placed
#behind the seats of regular cab dakotas (Gen 1 or Gen 2)... # #I'm looking
at using the following dimensions:
#14" h X 7" bd X 4" td X 20" w (.51 cu.ft.)
#
#What dimensions have you all been sucessful with?
#
#My only concerns are being able to set the seat all the way back, and not
#leaned back a little (can't stand sitting straight up like a board)... #
#Tom "Slick" North #96 5.2L Sport RC Dakota
This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:48:08 EST