A vise is an effective "press" in many instances. I have rebuilt many control
arms and used a vice and a selection of sockets to press the bushings in. Can't
say that it will work on your Dakota since I have never had to replace a
bushing in either of mine. I give it a shot and if you can't get them in with
the vice take the control arms to the local shop and have them press them in.
Dave Clement
99 SLT+ CC 4x4
In article <011801c3cf44$9b42fc10$401190cf@Main>, smutpup@wctel.net (smutpup)
writes:
>
>
> Haynes manual says that they " might "have to be pressed in. Can anybody
> verify this? or can i get them in with a vise and a bfh? thanks. mike
>
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.4 - Release Date: 12/22/2004
>
This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:48:09 EST