That's probably about right, you can do what I did, the first place quoted
me about $90, so I checked around to a few independent shops and finally got
a quote of $40. That guy got screwed on that deal, it took a long time on
the rears, getting to the two top bolts on each side was bad and the lower
bolts he was using a 5 ft. Breaker bar. (On the lift, I could walk under it
easily and I'm 6'3" [tires and all) and the guy workin' on it was 5 ft.
nothin, and the breaker bar was down past his waist. But just look around
and see who quotes ya cheaper.
Zach
>Date: Tue, 15 Mar 2005 16:46:35 -0800 (PST)
>From: Dan Kramarsky <dkramarsky68@yahoo.com>
>Subject: DML: Labor time for r/r of all 4 shocks?
>
>Hi DMLers,
>
>
>Can someone look up the labor time for remove/replace all 4 shocks on my
>'92 Dak CC?
>
>
>A guy says its 1.5 hours for all 4. I'm thinking 30min to 45min tops.
>
>
>- -dan
>
>
>
>Dan K.
>'92 Grey Dak CC, 318, 4x2, 46RH, 3.92 rear, 235/75R15, PS, PW, PB, PL, AC.
>
>Mods: Trans-Go, APS Precision's 2400 stall, cool air induction, K&N oil
>& air filter, Autolite 3924s, & re-located IAT.
>
>Future: 180* stat, MP PCM ( when Premium gas gets cheaper )
This archive was generated by hypermail 2b29 : Fri Apr 01 2005 - 00:13:21 EST