"jerry lee" <jerrylee@gumlog.net> wrote:
: I have been around for a few years. This is my 1st post in years. My
: name is Jerry and I am originally from Gainesville, GA now residing in
: Lavonia, GA. My question is " how do I remove the complete driving light
: unit on the right side?" I don't see/feel a bolt on the bracket to
: remove it with. Any suggestion would be helpful. My right side unit is
: cracked and I was going to repair it and replace the bulb.
Hi Jerry! Sorry for the delay getting around to answering your
question; I don't have a GenIII Dak, and figured somebody who actually
knows would get back to you. :-) I do have access to a 2000 FSM however,
and here is a picture from it:
http://www.jonsteiger.com/temp/gen3foglamp.jpg
Looks like there are 2 bolts, but they are hidden up on top of
that support bracket. According to the FSM, you just unplug the
connector, remove those bolts and the entire unit will come out.
I hope that helps!
--
-Jon-
.-- Jon Steiger ---- jon@dakota-truck.net or jon@jonsteiger.com --.
| 1970 Barracuda - 1990 Dakota 'vert - 1992 Ram 4x4 - 1996 Dakota |
| 1996 Intruder 1400 - 1996 Kolb FireFly - 2001 Ram QC 3500 CTD |
`------------------------------------ http://www.jonsteiger.com --'
This archive was generated by hypermail 2b29 : Sun May 01 2005 - 01:40:55 EDT