All of the fuses are in the PDC now. One other issue with the circuit
boards is one or both lights not working (at random).
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of andy levy
Sent: Wednesday, May 11, 2005 5:51 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Need some quick Ram help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 5/10/2005 21:56, Bernd D. Ratsch wrote:
| Common issue on the Ram's are the circuit boards for the rear lights.
| If the "Lamp Out" light is on...check the rear bulbs for burn marks on
| the plastic/wire contacts. If they have the burn marks...you'll need
| new/updated circuit boards and bulbs.
I wasn't told anything about a light being on, but as I said in my reply to
Jon, this is all second-hand information.
| There are several fuses for the lights: L/R, R/R, and Trailer.
In the PDC, or under the dash?
- --
- -andy
This archive was generated by hypermail 2b29 : Wed Jun 01 2005 - 05:44:45 EDT