At 08:35 AM 6/18/05, TonyC wrote:
>If this matches what you have, it is a 5V supply to the Auto Trans. It
>feeds power to the Governor Pressure Sensor (grounded through C2-pin 29
>Light Grn Red Stripe), and Temp sensor in the trans (grounded through C2
>pin 1 Violet). See page 8W-31-2.
Thanks Tony. It matches what I have for the 97 5.2L pcm.
Some owners on the Delphi R/T board have mentioned a resistor mod
on C2-pin 31 as a "fix" to the no, 1-2, wot shift problem.
Do you happen to know if they are correct with putting the resistor onto
the wire leading to C2-pin 31? I would have thought that the resistor
would be on the C2-pin 29 wire if you wanted to trick the pcm on what
the governor pressure signal was. Any insights would sure be appreciated.
Bob
This archive was generated by hypermail 2b29 : Fri Jul 01 2005 - 09:48:06 EDT