Re: Belly Pan

From: jon@dakota-truck.net
Date: Sat Jul 16 2005 - 17:45:00 EDT


"James Calder" <jCalder3@cfl.rr.com> wrote:

: Anyone know what the torque specs are for the belly pan bolts?

   12 foot pounds (144 inch pounds) is the final number, the
recommended procedure to get there is to tighten in a criss cross
pattern, starting from the center and working out as follows:

   - Tighten the "middle bolts" in sequence to 12, 24, 36, 48, 60,
     and then 72 inch pounds. On a V6 there are two "middle bolts",
     on a V8 there are four.
 
   - Tighten the remaining bolts directly to 72 inch pounds (no need
     to go in steps of 12 like with the middle bolts).

   - Verify that all bolts are now at 72 inch pounds

   - Tighen all bolts in a criss cross pattern, starting from the
     middle and working your way out, to 144 inch pounds (12 ft-lbs)
 
   - Verify that all bolts are now at 144 inch pounds (12 ft-lbs)

-- 
                                          -Jon-

.-- Jon Steiger ---- jon@dakota-truck.net or jon@jonsteiger.com --. | 1970 Barracuda - 1990 Dakota 'vert - 1992 Ram 4x4 - 1996 Dakota | | 1996 Intruder 1400 - 1996 Kolb FireFly - 2001 Ram QC 3500 CTD | `------------------------------------ http://www.jonsteiger.com --'



This archive was generated by hypermail 2b29 : Mon Aug 01 2005 - 10:56:27 EDT