ok, this may seem strange but I have an unidentified connector hanging from the wiring
harness. nothing is connected to it. and it has got me curious as to what its for.
ok. this connector has just 2 contacts. it's in the wiring harness behind the
alternator. in fact, it comes from the some main harness connector that sits on the
passenger-side valve cover as the IAT and the Coolant temp sensor and the ECT sender do.
the wire colors and sizes are...
#1 wire: Light-green with Brown tracer 18AWG
#2 wire: Black with white tracer 18AWG
The connector style is 2-conductor "parallel blade" and is identical to the one used for
the hood lamp disconnect. ( the connector I talking about here is on the firewall near
the hinge and goes to the hood. )
So, with all that said, does anyone know what it could be for?
I looked in the FSM. No luck. Couldn't find anything about it.
-dan
Dan K.
'92 Grey Dak CC, 318, 4x2, 46RH, 3.55 rear, 235/75R15, PS, PW, PB, PL, AC.
Mods: Cool air, K&N oil/air, 180* T-Stat, Autolite 3924s, re-located IAT, Trans-Go shift kit.
Future: Swap motor for a slightly modified Magnum 5.9L engine.
__________________________________
Yahoo! for Good - Make a difference this year.
http://brand.yahoo.com/cybergivingweek2005/
This archive was generated by hypermail 2b29 : Wed Feb 01 2006 - 20:27:15 EST