Terrible Tom wrote:
>
> Dan Kramarsky wrote:
>
>> ok, this may seem strange but I have an unidentified connector
>> hanging from the wiring
>> harness. nothing is connected to it. and it has got me curious as to
>> what its for.
>>
>> ok. this connector has just 2 contacts. it's in the wiring harness
>> behind the
>> alternator. in fact, it comes from the some main harness connector
>> that sits on the
>> passenger-side valve cover as the IAT and the Coolant temp sensor and
>> the ECT sender do.
>>
>> the wire colors and sizes are... #1 wire: Light-green with
>> Brown tracer 18AWG
>> #2 wire: Black with white tracer 18AWG
>>
>> The connector style is 2-conductor "parallel blade" and is identical
>> to the one used for
>> the hood lamp disconnect. ( the connector I talking about here is on
>> the firewall near
>> the hinge and goes to the hood. )
>>
>>
>> So, with all that said, does anyone know what it could be for?
>> I looked in the FSM. No luck. Couldn't find anything about it.
>
>
> Almost sounds like you are describing the OBD-I datalink connector
>
Hmm ok disregard - if I remember correctly the OBD-I port has more than
two pin connectors
-- --------------------------------------------------------------------------- Rocks are for skipping... I'm all about the mud 75 Honda CL360, 89 Dakota, 89 Dakota 4x4, 95 Dakota 4x4, 01 Ram 4x4 http://members.aol.com/silvereightynine/ AIM & Yahoo: SilverEightynine
This archive was generated by hypermail 2b29 : Wed Feb 01 2006 - 20:27:15 EST