And Buick made a nice little V6 for a while. Those parts could fit in anything.
RB> I used to put Buick pistons in Harleys, (in a pinch)...
RB>
RB> Rascal
RB>
RB> -----Original Message-----
>> From: owner-dakota-truck@bent.twistedbits.net
>> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Kevin S
>> Sent: Tuesday, January 10, 2006 11:15 PM
>> To: dakota-truck-moderator@bent.twistedbits.net
>> Subject: DML: Anyone got 4.7L Piston specs or pics?
>> I'm helping with a project that may be able to benefit from our Mopar
>> prowess.
RB> Does anybody have access to pics and/or some measurements for the
RB> stock
RB> 4.7L pistons?
>> I'm told that they have the correct bore and pin size to swap into a
>> bored-out
>> Volvo B20 motor that my brother is building.
>> What I need is the overall height of the piston, and the height from
>> the pin to the top.
>>
>> Anyone have any pics?
>>
>> Any preferred manufacturers or sources?
>>
>> The reason for using them is that they're ligher (approx. 6 oz. ea),
>> cheaper,
>> and much more readily available than custom made oversize pistons.
>> Thanks in advance!
>>
>> Kevin Sellstrom, W6KTB E-Mail:ksellstr@softcom.net ***Elk Grove,
>> California***
>>
>> '99 Dodge Dakota, 5.2L, SLT, AT, 4x4
>> '69 Dodge D200,
>> '83 Volvo 244Ti,
>> '62 Volvo 122S,
>> '68 Volvo 122S,
>> '98 Rockhopper A1FS
Kevin Sellstrom, W6KTB E-Mail:ksellstr@softcom.net
***Elk Grove, California***
'99 Dodge Dakota, 5.2L, SLT, AT, 4x4
'69 Dodge D200,
'83 Volvo 244Ti,
'62 Volvo 122S,
'68 Volvo 122S,
'98 Rockhopper A1FS
This archive was generated by hypermail 2b29 : Wed Feb 01 2006 - 20:27:15 EST