Yeah, fine to lube them, white grease or anything that will stay in place.
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Dan Kramarsky
Sent: Tuesday, January 24, 2006 12:56 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Column shifter squeak and roughness
DML:
I got some squeaking and some roughness in the shifter.
Can anyone tell me if its safe to lube the column shifter linkages from
steering column
all the way down to the tranny?
If so, what lube is best for this? a Moly lube? a multi-purpose grease?
what?
PS. Tranny is fine. Its the linkages.
thanks!
-dan
Dan K.
'92 Grey Dak CC, 318, 4x2, 46RH, 3.55 rear, 235/75R15, PS, PW, PB, PL, AC.
Mods: Cool air, K&N oil/air, 180* T-Stat, Autolite 3924s, re-located
IAT, Trans-Go shift kit.
Future: Swap motor for a slightly modified Magnum 5.9L engine.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Wed Feb 01 2006 - 20:27:16 EST