Open the wiring harness at the splice under the main fuse box under the hood
and look for corroded wires.If not look into your distributor pickup. Hope
this helps. Steve
>From: "Dave Buerk" <dave.buerk@epinei.com>
>Reply-To: dakota-truck@dakota-truck.net
>To: <dakota-truck@dakota-truck.net>
>Subject: DML: RE: Need Help 1993 Dakota
>Date: Fri, 10 Mar 2006 09:54:40 -0500
>
>
>Hello, I need some help with my 1993 Dodge Dakota V8 5.2 truck. My main
>problem is the truck won’t start. My second problem is I do not have a
>“Check Engine Light” when the truck is in the on position. I have checked
>the vehicle for fuel and spark, both were good. The battery is showing
>12V. I have double checked all of the fuses. I tried pulling the codes
>and
>that’s when I noticed the check engine light was not working. I checked
>the
>bulb and it was fine. I ordered a new ECU from NAPA ($170) thinking that
>had to be the problem, but after I installed the ECU I was still in the
>same
>spot. The truck will crank over but never starts. Another note, my
>interior light has not worked for a few years, that bulb is fine also. I
>would appreciate any suggestions or help I can get. Thanks, Dave.
>
>
>.
>.
>.------------------------------------------------------------------.
>| Make your plans NOW to attend the National DML Meet in Colorado! |
>| Date: July 15-23, 2006 - More info: http://meet.dakota-truck.net |
>`------------------------------------------------------------------'
>
.
.
.------------------------------------------------------------------.
| Make your plans NOW to attend the National DML Meet in Colorado! |
| Date: July 15-23, 2006 - More info: http://meet.dakota-truck.net |
`------------------------------------------------------------------'
This archive was generated by hypermail 2b29 : Sun Apr 02 2006 - 18:27:15 EDT