Be very very careful what you say, a bunch of us are about to drive across
country.
Walt
In article <BAY108-F30860F0DC46E7D8BF38B75A57A0@phx.gbl>, hopsdak@hotmail.com
("Hop *") writes:
>
>
> Usually the problem comes from when a guy forgets to check the hood
> clearance between the TB bolt and the hood.
> I'd mention a name but, i'm about to take a long road trip so i won't.
> --Hop
> P.S.- It starts with a "T"...
>
>
>
> >From: Walt@Walt-n-Ingrid.Com
> >Reply-To: dakota-truck@dakota-truck.net
> >To: dakota-truck-moderator@bent.twistedbits.net
> >Subject: Re: DML: RE: Round air cleaners
> >Date: Fri, 23 Jun 2006 13:24:06 +0000 (UTC)
> >
> >Josh,
> >
> > Is the problem that the base of the air cleaner hits on something on
> >top of
> >the intake. IIRC when I put a 14" on my '88, the base that came with the
> >air
> >cleaner was recessed to make it sit lower, however it hit on a hard A/C
> >line.
> >I ended up swapping bases with another air cleaner that had a flat bottom
> >which
> >mage the air cleaner sit a little higher.
> >
> >Walt
> >
> >In article <44976.67.149.50.224.1151063630.squirrel@webmail.omg-stfu.com>,
> >josh.lists@omg-stfu.com ("Josh Battles") writes:
> > >
> > >
> > > On Thu, June 22, 2006 10:00 am, Ray Block wrote:
> > > >
> > > > While an open element looks and sounds cool, you should be aware it
> >will
> > > > slow you down from the heated air it inhales. I lose a tenth of a
> >second
> > > > and one mph in the quarter with a 14x3 K&N. My smaller stock air
> >cleaner
> > > > drawing air from the grille is much better.
> > > >
> > > > Ray
> > > > http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
> > >
> > > I have a functional cowl hood and will be building an airbox to seal the
> >area
> > > it'll be sucking air from. I don't really anticipate this to be an
> >issue.
> > >
> > > Will that unit fit the TB? They tell me it's a 5.25" opening.
.
.
.------------------------------------------------------------------.
| Make your plans NOW to attend the National DML Meet in Colorado! |
| Date: July 15-23, 2006 - More info: http://meet.dakota-truck.net |
`------------------------------------------------------------------'
This archive was generated by hypermail 2b29 : Sat Jul 01 2006 - 11:43:31 EDT