Re: Rock Auto ball joints

From: srp@cox.net
Date: Thu Aug 03 2006 - 19:22:54 EDT


You need a pair--- 2 upper, 2 lower.

Also, check you bushings-- if they are cracked-- should replace them...

If you don't want to mess with the install, I sell the control arms already upgraded.

Sam
www.socaldakota.com
619-274-1292

---- Rick Barnes <rascal@scrtc.com> wrote:
>
> I have a question for those who know or have ordered the Moog ball joints
> from Rock auto. When one orders on their site, is the "quantity 1" a pair
> or do I order 2 each of upper and lower? I still have my originals after
> 155k miles and think I will just go ahead and replace them. They cost about
> $45 for "quantity 1" which sounds like its both uppers, and both lowers.
> Anyone know?
>
> Bob, (Daksy Bob), I found an "indy" that will replace my bearing hubs for
> $30...gotta love these small towns like where I live where some good
> mechanics will work for cheap. This guys home/shop is really clean and nice
> and several locals rave about the guy too. I may have him replace my ball
> joints if I cannot motivate myself.
>
> Bob, also, that little oil leak I was having was just a valve cover that you
> suggested I check, thanks for that good advice.
>
> Rascal
>
>
>



This archive was generated by hypermail 2b29 : Fri Sep 01 2006 - 10:07:45 EDT