Lemmee see...160,000 miles
Brake booster, (Just like Daksy), two throttle position sensors, U joints,
front wheel bearings, upper and lower ball joints, front brakes several
times and about to do them again, two water pumps, though only as
preventative along with hoses, rear brakes, one battery, shocks-twice on the
front, my shifter knob keeps popping off, but I have a little hose clamp on
it now, mine driver seat has always been loose, slides an inch or so
front-to back, never have figured that one out and I have some "grindy"
feeling that I have yet to discover. Plugs and wires and caps many times,
but generally very pleased. Mine, like Daksy, is a 2wd, but I do have
original tranny and rear end..so far anyway.
I am now looking for a good deal on an SRT-10, black with navigation....
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of DAKSY
Sent: Monday, January 15, 2007 6:25 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Help! Advice [Chris Martin]
Hey, Josh...
<snip> I've done ball joints, endlinks, swaybar bushings, 2 tensioner
pullies, a
water pump, 2 transmissions, 2 heater cores, both front wheel bearings, and
an alternator.<snip>
Ball joints, tensioner, front brakes (3X), rotors (2X), rear brakes, brake
drums, lower crank seal, alternator, crank position sensor, (1) wheel
bearing, brake booster, pinion bearings, universals universals, (2) gas
caps, multifunction switch, water pump, power steering pump, power steering
hoses & (3) cigarette lighters!.
DAKSY at 129K
Bob (DAKSY) Smith
DAKSY2K on AIM
2K SY Dakota Sport +
V-6 4 x 4 5 speed
2K05 HD 883C YP
http://home.nycap.rr.com/daksy/
Averill Park, NY
This archive was generated by hypermail 2b29 : Mon Feb 18 2008 - 18:47:20 EST