I'm using the LA covers on my V6 and have installed them on the 5.2/5.9L as
well. The only thing that I use to keep them sealed are the GM valve cover
hold-down brackets (found at most parts houses in the Mr. Gasket line).
- Bernd
-----Original Message-----
From: Ray Block [mailto:bpracing@worldnet.att.net]
Sent: Tuesday, February 27, 2007 5:24 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Valve Cover
> -----Original Message-----
> From: Jamie Calder
>
> Does anyone know if the valve cover bolt holes are spaced the same on the
> LA
> and Magnum engines? Trying to figure out if these would fit:
> http://store.summitracing.com/partdetail.asp?autofilter=1&part=RNM%2D1103%
> 2D
> 90%2DP&N=700+4294862572+115&autoview=sku
>
> Right now I have the Made For You clamp style that bolts into the valve
> cover but the ones closest to the headers are melting.
>
> Thanks,
> James
LA valve covers have only 5 bolt holes.
I've used the Made4u vertical looms with no melting issues near my headers.
Ray
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Thu Mar 01 2007 - 00:44:23 EST