Should fit. I had a home brew airbox. But I see no reason why the K&N
wouldn't fit.
-- *------------------------------Y2KOTA------------------------------* Don Mallett Y2K QC 4.7L Auto SLT+ 4x2 http://www.y2kota.us *-----I'm not late! It's that the rest of the world is early!!-----*On Mar 11, 2007, at 9:38 PM, Barry Oliver wrote:
> > Mallett, Donald B wrote: >> Viper fan, Conflicts? In regards to what? >> I put one on my Dak a few years ago. The only draw back is the extra >> load on the electrical system. Just to compound the issue, I threw a >> underdrive pulley into the mix. When the A/C is on, the fan is not >> needed while moving. One thing that helped with the electrical load >> somewhat while using the A/C is a circuit that will turn off the fan >> at >> speeds great then 20mph. It turns the fan back on when slowing at >> about >> 14mph. A failsafe was left that will turn the fan on whenever the >> engine >> calls for cooling. >> I have photos and write up on my web site. Look in the modifications >> page for the link. >> - -- >> *------------------------------Y2KOTA------------------------------* >> Don Mallett >> Y2K QC 4.7L Auto SLT+ 4x2 >> http://www.y2kota.us >> *-----I'm not late! It's that the rest of the world is early!!-----* > > > Actually, the conflict I was invisioning is if I get the K&N with the > airbox, does the corner of the viper fan housing fit with the airbox > housing? >
This archive was generated by hypermail 2b29 : Sun Apr 01 2007 - 03:13:51 EDT