Tony writes: So I would probably see it by looking on the bottom of the
manifold for a casting?
For what it's worth, the manifold is at the bottom of this page:
http://www.edelbrock.com/automotive_new/mc/manifolds/ford_bb_performer.shtml
Not necessary to look under that one for the passage. It is plain as day
from the top
side. Look @ the "Runner" that crosses from seft to right under the carb!!
That is
the exhaust crossover...it is much smaller than the cylinder intake
runners..
Azie
This archive was generated by hypermail 2b29 : Sun Apr 01 2007 - 03:13:51 EDT