Unless you know someone with gauges or know someone at a shop that can check
this for you...no easy way around it. I also really don't trust the
AutoZone gauges that come with the cans...they only show the low side which
isn't all that helpful without knowing the high-side pressure. Why it's
cycling so much: malfunctioning cycling switch, bad pressure transducer,
PCM, low pressure...without knowing the pressures, i'd be guessing.
- Bernd
-----Original Message-----
From: Francis Fastje [mailto:ffastje@cox.net]
Sent: Thursday, March 15, 2007 3:05 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: Just wanted to ask for some help with a/c problem.
Bernd D. Ratsch wrote:
> Those sound "ok"...but would like to see the high side pressure.
>
> -----Original Message-----
> From: Francis Fastje [mailto:ffastje@cox.net]
> Sent: Wednesday, March 14, 2007 5:18 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: RE: Just wanted to ask for some help with a/c problem.
>
>
> Bernd D. Ratsch wrote:
>
>> What are the pressures at?
>>
>> -----Original Message-----
>> From: Francis Fastje [mailto:ffastje@cox.net]
>> Sent: Tuesday, March 13, 2007 1:34 PM
>> To: dakota-truck@dakota-truck.net
>> Subject: DML: Just wanted to ask for some help with a/c problem.
>>
>>
>>
>> Getting warm here. Just wanted to ask for some help with a/c problem.
>> Compressor keeps cycling on and off but no a/c. I need help! I checked
>> the charge and that is good. Any help I would love. TIA!
>>
>> FFastje@cox.net
>>
>>
>>
>>
>>
>>
>>
> 25 psi to 45 psi on low side. I do not have the actual gauges just the
> one that came with
> the r134a a bought at wal mart.
>
>
>
>
>
>
How would one go about that without spending large sums of money?
This archive was generated by hypermail 2b29 : Sun Apr 01 2007 - 03:13:51 EDT