Heheheh....don't want to post how short it takes us at the dealership. ;)
-----Original Message-----
From: jon@dakota-truck.net [mailto:jon@dakota-truck.net]
Sent: Wednesday, April 11, 2007 8:45 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Re: Differential fluid changes
David Gersic <info@zaccaria-pinball.com> wrote:
> I found more than a few references on the 'net about a diff oil change
> taking about 45 minutes. Maybe after you've done it a few dozen times,
> but I think I spent that long scraping the Permatex off the cover on
> the first one. The second one did go faster, once I got out one of
> those synthetic rust stripping sanding pads and my electric drill and
> cleaned it off with that.
I don't have a shortcut for the housing itself, but as far as the cover
goes, I usually knock the big stuff off with a scraper, and then take it
over to the bench grinder w/wire wheel. Seems to work pretty well.
--
-Jon-
.- Jon Steiger -- jon@dakota-truck.net or jon@jonsteiger.com -.
| '96 Kolb Firefly, '96 Suzuki Intruder, Miscellaneous Mopars |
`-------------------------------- http://www.jonsteiger.com --'
This archive was generated by hypermail 2b29 : Mon May 07 2007 - 19:04:35 EDT