David Gersic <info@zaccaria-pinball.com> wrote:
> I found more than a few references on the 'net about a diff oil
> change taking about 45 minutes. Maybe after you've done it a few
> dozen times, but I think I spent that long scraping the Permatex off
> the cover on the first one. The second one did go faster, once I got
> out one of those synthetic rust stripping sanding pads and my
> electric drill and cleaned it off with that.
I don't have a shortcut for the housing itself, but as far as the
cover goes, I usually knock the big stuff off with a scraper, and then
take it over to the bench grinder w/wire wheel. Seems to work pretty
well.
--
-Jon-
.- Jon Steiger -- jon@dakota-truck.net or jon@jonsteiger.com -.
| '96 Kolb Firefly, '96 Suzuki Intruder, Miscellaneous Mopars |
`-------------------------------- http://www.jonsteiger.com --'
This archive was generated by hypermail 2b29 : Mon May 07 2007 - 19:04:35 EDT