I don't need the slider pins. The bracket that they bolt ON TO is my
problem. I guess we would refer to that as the steering "knuckle". Not quite
so easy as just getting new pins. Thanks though.
----- Original Message -----
From: "Zito, James A (GE Infra, Energy)" <james.zito@ge.com>
To: "Dakota list (E-mail)" <dml@dakota-truck.net>
Sent: Sunday, May 20, 2007 9:27 AM
Subject: RE: DML: disc brake question
>
> From Eric:
>
> Hey gang...got a question that I know has been answered here before, but I
> didn't give it much attention, because at the time it didn't apply to me.
> Here's my situation... I stripped out one of the front slider bolt
> threads
> from the steering knuckle, enough to not trust them.
>
>
> If you are talking the sliding pins in the caliper bracket that the
> caliper bolts to, why not buy new ones from the stealer? I got a full set
> (all 4 and top and bottom are different), after I munged one of them up,
> well actually my mom picked them up for me. They were about $50 for all
> 4, so I'd guess maybe $10-12 for the one you need.
>
>
> Jim
> 03 CC Dak
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.467 / Virus Database: 269.7.6/813 - Release Date: 5/20/2007
> 7:54 AM
>
>
This archive was generated by hypermail 2b29 : Fri Jun 01 2007 - 09:06:10 EDT