Groovy
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of DAKSY
Sent: Wednesday, June 20, 2007 7:04 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: RE: Re: RE: Speaking of Codes...
Hey, Bernd!
<> Resistance check (previous post has that) and then just
replace the darn thing.<>
It's just NEVER easy...*sigh* My freekin multimeter sh*t the bed so I
replaced the sensor...
Why does everything hafta be a workout? Is it me?
Not only is the ECT behind the Alternator, It's DIRECTLY under the heater
hose...
The FSM saved my butt, tho..
It says to fabricate a hook out of a length of wire coat hanger...
Course EVERY coat hanger in THIS house is made of PLASTIC!
Fortunately I had one in the back of the DAKSY- that I BORROWED & that I'd
used to unlock my daughter's car when she locked her keys in it...
The connector came off easy enuff, & a 13mm deep 1/4" drive socket got the
sensor out...BUT...
that SAME deep socket was too deep to install the new one...I could turn it,
but I couldn't get any downwards pressure to get the threads to engage..
After rummaging thru the tool box & coming up empty, I simply wadded up some
paper towel & jammed it in the hex & made the deep socket less deep!
The connector when back on with xtra long needle-nose pliers (FSM hint!)
She started up & I took a 3-mile ride & the temps held at t-stat setting...
Back in action again!
Thx to all who responded!
Bob (DAKSY) Smith
DAKSY2K on AIM
2K SY Dakota Sport +
V-6 4 x 4 5 speed
2K05 HD 883C YP
http://home.nycap.rr.com/daksy/
Averill Park, NY
This archive was generated by hypermail 2b29 : Sun Jul 01 2007 - 21:47:16 EDT