In article <5.1.0.14.2.20070705213701.00c14da8@mail.execulink.com>,
sixpackdak@execulink.com (James Johnson) writes:
>
>
> Like the title says, I have a 94 5.9L out of a B-van I want to rebuild and
> drop in my 92 Dakota with A-518 trans. I want to keep my cruise
> functioning, so an aftermarket stand-alone engine management system isn't
> really an option.
>
> Any suggestions?
>
> Thanks,
> James
>
A 93 PCM would be the best solution. A 94-95 PCM will also work, but it will
pop a code. I have one in my truck after I swapped engines. It triggers a
transmission temp code. However - the 92-93 trucks did not have a sensor. I
suspect the Rams did.
There was a guy on dusa or dak-dur selling a MP PCM for the 94-95 Rams
recently, it might still be available.
All I did was use my 92 V8 harness and transfer over the appropriate sensors.
Whatever you do - pull the CPS out of the back of the block before you yank the
engine. I didn't do that and snapped it in half.
Kevin
This archive was generated by hypermail 2b29 : Wed Aug 01 2007 - 00:15:21 EDT