DAKSY wrote:
> If you're gonna replace one, you might as well do both of em while
> you're under there. You'll need a special O2 sensor socket with a
> relief cut out of it for the wire harness...NAPA has em.
> As far as the O2 sensors, I got mine here
> http://www.oxygensensors.com/ (Thanx Bernd!).
> Simple enough to change them out. I didn't even hafta jack up the
> DAKSY, but I don't know what year or if you've got a 4X4 or not. Took
> me longer to crawl under neath & get into position than it did to
> change both of em.
> Good luck,
> HTH
Sorry, should've mentioned that it's a '97 2WD.
Thanks for the info. I'll have to crawl under to take a look, and see
if I think I'm up to it. My understanding is that they're on top of the
exhaust pipes, one before the cat, and one after, correct?
Thanks,
Kurt
This archive was generated by hypermail 2b29 : Tue Dec 04 2007 - 17:27:37 EST