> -----Original Message-----
> From: Terrible Tom
>
> <snip>
>
> Also - I have no kick down linkage hooked up to the transmission. I am
> litterally shifting through the gears with the colum shifter - like a
> stick shift.
Tom, I hope you have the kick down lever on the trans wired at least part
way toward the rear. If not, your line pressure is going to be really
low.
> The stock kickdown rod is too short for the set up - your
> TBI spacer adapter plus the height of the Edelbrock manifild - causes
> the TBI to sit up too high for the rod.
Check this out for a kick down linkage: http://www.lokar.com/
> I doubt this combination would
> even fit under the hood if I didnt have a 3 inch body lift. The air
> cleaner is REALLY close to the underside of the hood.
You might try a dropped base aftermarket air cleaner.
-Ray
This archive was generated by hypermail 2b29 : Sun Mar 02 2008 - 02:10:11 EST