It's not hard at all. A screwdriver and hammer to tap it out and a long
socket to put in the new one (or preferably the seal driver). It will leak
fluid out though - be careful not to take an ATF bath.
- Bernd
-----Original Message-----
From: josh@stolarz.org [mailto:josh@stolarz.org]
Sent: Monday, July 28, 2008 3:26 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Tail Shaft Seal on a 45RFE
How big of a job is it going to be to replace the tail shaft seal? It
appears to be leaking from there, the trans fluid and filters were changed
maybe 6 months or 2000 miles ago. The truck is a 2001 4.7 with 64k miles.
This archive was generated by hypermail 2b29 : Fri Aug 01 2008 - 00:06:48 EDT