Zito, James A (GE Infra, Energy) wrote:
> hopefully i'll be able to get the snapped bolts out of the engine to put
> new ones in, otherwise you'll see a post here for a new block as well.
>
> - --eric
>
>
> Eric,
>
> Absolute worst case would be the need for a new head due to the snapped
> bolt. More likely you would be able to use a left hand thread drill
> followed by an easy out to remove it. Possibly even with the head still
> on the engine, pop out the inner fenderwell. Or pull the head and take
> it to a machine shop and they will be able to get it out for small
> money.
>
> Note the above all assumes you are talking about the exhaust manifold
> bolts.......
>
>
> Jim
> 03 red CC Dak with full time 2wd and 2 pistons short of a full load
>
i was .. thanks..
This archive was generated by hypermail 2b29 : Mon Dec 01 2008 - 11:09:51 EST