I can email Mike the connector pinouts - what's his email addy again? I
don't have the original post at work.
- Bernd
-----Original Message-----
From: Jason Bleazard [mailto:dml@bleazard.net]
Sent: Thursday, July 02, 2009 8:56 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: 2001 power mirrors on a 2000... wiring Q
On Wed, July 1, 2009 3:49 pm, Mike Sykes wrote:
>
> Anyone know the actual difference in these mirrors?
I put '98 mirrors on our 2001. The connectors were different. 2000 might
use the same connectors as 2001, since the heated mirrors were an option in
2000. However, Brian already mentioned that the pinout is different.
I didn't need to do any soldering, I just replaced the connectors with new
ones and crimped the pins on to the wires. I tried to match the connectors
on the truck, but wasn't able to find anyone who had any clue where that
part came from. It was just a matter of figuring out what wire went where,
they were different colors so I had to dig out the volt meter.
Jason
This archive was generated by hypermail 2b29 : Sat Aug 01 2009 - 00:31:46 EDT