Hey, DML...
I know...I'm officially a 'lurker' again...but...
The DAKSY had the wheels aligned & now has a severe "CLUNK" when turning the
wheel to full crank.
The bolts holding the pivot arm to the upper "A" are jumping in their
respective slots on the driver's side.
Checked the Bible & the torque spec is 95 lbs/ft. They're ALL of that &
maybe more.
Right side is secure.
What am I looking at (*hint*...*Bernd*...help!) here?
I'm thinkin that just replacing the bolts ain't gonna do squat.
The upper "A" gotta be replaced, as well?
Should I do the "P" side while I'm at it?
Pisses me off that I'll hafta pay for another wheel alignment, but I'd
rather 'get er dun'=20
& not have a catastrophic failure at road speeds...
Thanx in advance...
Bob (DAKSY) Smith
DAKSY2K on AIM
2K SY Dakota Sport +
V-6 4 x 4 5 speed
2K08 HD Softail CrossBones
Satin Black (Not Yellow)
http://home.nycap.rr.com/daksy/
Averill Park, NY
This archive was generated by hypermail 2b29 : Sat Aug 01 2009 - 00:31:46 EDT