RE: Ball joints

From: Brian (hskr@cox.net)
Date: Tue Jul 21 2009 - 21:33:24 EDT

Next message: Terrible Tom: "Gimme fuel, gimme fire! Gimme Da' 09 BBQ!!!"
Previous message: ffastje: "Ball joints"
In reply to: ffastje: "Ball joints"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

The Energy suspension bushing kit comes with all 8 bushings to do both sides
upper and lowers. And I would highly recommend to get all four ball joints
replaced at the same time as well with some good Moog greasable ones.

brian cropp
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of ffastje
Sent: Tuesday, July 21, 2009 8:30 PM
To: DML
Subject: DML: Ball joints

Well it seems the front end is falling apart. I took the truck in to
have the tranny serviced ATF+4 thanks bernd.I already knew I had a bad
passenger side idler arm and inner tie rods but now it seems the lower
ball joint on the drivers side is bad and all the bushings look like
sh**. So here is my? Should i do the uppers also and both sides and can
one find bushing kits so i have all the bushings at once?

-- ffastje@cox.net ffastje@gmail.com 1999 dakota cc 3.9L 4X4 57,332 miles

Checked by AVG - www.avg.com Version: 8.5.375 / Virus Database: 270.13.21/2252 - Release Date: 07/21/09 05:58:00

Next message: Terrible Tom: "Gimme fuel, gimme fire! Gimme Da' 09 BBQ!!!"
Previous message: ffastje: "Ball joints"
In reply to: ffastje: "Ball joints"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sat Aug 01 2009 - 00:31:46 EDT