I was wondering if there was something like this I could do. Just
going to the on position does not help. Thanks for the input, I will
give it a try.
On Tue, Jul 28, 2009 at 1:20 PM, Ray Block<BPracing@wowway.com> wrote:
>
>
>
>> -----Original Message-----
>> From: Ted Wiegandt
>>
>> I am getting the slow start from the bad fuel pump check valve. I
>> just posted a P0302 misfire which I am hoping is just due to the rough
>> start up as the pressure builds. How hard is the fuel pump to get to
>> on this truck. Do I have to drop the fuel tank?
>> Thanks,
>> Ted
>
> Can't answer your question specifically but I can offer a tip to prevent the
> rough start up. If your pump is losing pressure with the engine off, you
> can cycle the pump by turning the key just to the run position...then off.
> Do this a couple times before trying to start the engine and it should have
> built enough pressure to avoid a rough start.
>
> Ray
>
>
>
This archive was generated by hypermail 2b29 : Sat Aug 01 2009 - 00:31:47 EDT