On Tue, Aug 11, 2009 at 16:12, <jon@dakota-truck.net> wrote:
>
> Terrible Tom <silvereightynine@aol.com> wrote:
>>>>why funny you should mention that - I'm bringing my M1 manifold with me... in case I have time :)
>>>
>>>
>>>
>>> Is it the 2bbl or 4bbl?
>>>
>>>
>
>> 2BBL - unfortunatly. Its the manifold that came with the 318 I bought from Chad Evans for
>> Christine. I've been meaning to take out the stock beer barrel POS and throw the M1 in.
>
>> If it was a 4BBL I would have left it on the engine and used that with your adapter plate, for
>> Christine, VS the Edelbrock RPM manifold I bought.
>
>
> Ah. Well, that's actually better for the Ram anyway - not only
> because it should have better low end torque for the heavier vehicle,
> but also because you don't need to hack up your A/C bracket.
I'm sure we can find a reason to hack up his A/C bracket anyway.
This archive was generated by hypermail 2b29 : Tue Sep 01 2009 - 00:06:01 EDT