Trying to pry out the old seal, but all I get are bent lips. Any ideas?
----- Original Message -----
From: "Tom Byrne" <kerib@ptd.net>
To: <dakota-truck@dakota-truck.net>
Sent: Sunday, August 16, 2009 3:32 PM
Subject: DML: Re: Re: Gear oil
>
> Got it, 34mm
> ----- Original Message -----
> From: "Tom Byrne" <kerib@ptd.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Sunday, August 16, 2009 1:35 PM
> Subject: DML: Re: Gear oil
>
>
>>
>> can't get my drive shaft to drop. Clamps are off, the shaft is in there
>> tight
>> ----- Original Message -----
>> From: "Tom Byrne" <kerib@ptd.net>
>> To: <dakota-truck@dakota-truck.net>
>> Sent: Saturday, August 15, 2009 10:50 PM
>> Subject: DML: Gear oil
>>
>>
>>>
>>> Noticed a puddle below the rear end of my Shelby Dak. I see that oil is
>>> leaking from the seal between the u-joint and the rear end. What kind of
>>> oil and friction modifier (factory posi) do I need when I refill?
>>>
>>>
>>> Tom Byrne
>>>
>>> 1984 Charger 2.2 FSP
>>> 1989 Shelby Dakota #233
>>> 1999 Neon DOHC Coupe
>>> 2007 Dodge Dakota Quad H.O.
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
This archive was generated by hypermail 2b29 : Tue Sep 01 2009 - 00:06:01 EDT