I've never seen a spotless new one from Chrysler...they're all corroded
slightly. I've never had an issue with the NAPA units though...and yes,
they're much cleaner looking than the Mopar units.
- Bernd
-----Original Message-----
From: Bob N [mailto:bocd@optonline.net]
Sent: Wednesday, January 06, 2010 5:15 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: RE: RE: Evap Coil / Heater Core BERND
Bernd
I ended up getting OE parts from the dealer. The evap core is the exact one
I took out as well as the heater core, but the heater core except for new
looking foam, it looked used...uglier than the one I took out. I figured it
was returned by someone who kept the new and returned their old one. I
complained to the dealer and they delivered a new one...damm thing looks the
same. You ever see a new one? Does the copper get corroded / festered up by
just sitting? I'm afraid to put this thing in. The auto zone one looked new
and shiny as did the one nappa but they both looked like they were silver
soldered by a blind man and smaller in size as well
Bob
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
Ratsch
Sent: Sunday, January 03, 2010 10:49 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: RE: Evap Coil / Heater Core BERND
It depends....but normally it's Valeo.
- Bernd
-----Original Message-----
From: Bob N [mailto:bocd@optonline.net]
Sent: Saturday, January 02, 2010 5:32 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: Evap Coil / Heater Core BERND
Bernd
Thanks for the reply pal. Do you know who that mfr is? I stopped at autozone
today and both the heater and evap core were very crappy. I don't remember
the heater core mfr but the evap was Everco 4 Seasons 5804 / 54777.
Bob
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Bernd D.
Ratsch
Sent: Saturday, January 02, 2010 2:15 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Evap Coil / Heater Core
Napa - They use the same manufacturer and they're about $50 less on the
evaporator.
-----Original Message-----
From: Bob N [mailto:bocd@optonline.net]
Sent: Saturday, January 02, 2010 11:34 AM
To: dakota-truck@dakota-truck.net
Subject: DML: Evap Coil / Heater Core
Hey guys,
Any input from the guru's here as to whether I should buy dealer items or go
to nappa?
I normally go to nappa.....but I don't want to chance inferior parts
here.....I'm not doing this job again :o(
Thanks
Bob
This archive was generated by hypermail 2b29 : Mon Mar 01 2010 - 00:25:25 EST